 |
NET-NET FAMILY
PRODUCTS
PLATFORMS
Net-Net SIP Multimedia-xpress
Net-Net EMS
NET-NET ROUTE MANAGER CENTRAL
Net-SAFE
WHITE PAPERS
INTELLECTUAL PROPERTY NOTICES
|
|
Acme Packet Net-Net 2600
Acme Packet Net-Net 2610
Acme Packet Net-Net 2620
|
For enterprises and contact centers, the Net-Net 2600 secures the high quality delivery of a broad range of interactive communications services and applications ranging from basic VoIP to Service Oriented Architecture (SOA)-enabled unified communications. It secures the SIP/H.323 trunking border to service provider IP networks and the Internet border to remote offices, teleworkers and mobile employees. In extremely security-conscious organizations, the Net-Net 2600 even secures the border to the private VPN connecting other sites. The SIP and H.323 interworking and transcoding capabilities of the Net-Net 2600 ensure support for a variety of endpoints, as well as interoperability with and between legacy IP PBX equipment and next-generation unified communications platforms. The Net-Net 2600 controls session admission, IP PBX or UC server loads and overloads, IP network transport and SIP/H.323 session routing to assure SLAs and minimize costs. Regulatory compliance requirements are also satisfied with encryption ensuring session privacy and call/session replication for recording on the SBC or separate recording servers.
Net-Net OS-E for SBC in the enterprise and contact center
The Net-Net 2600 operates Acme Packet’s Net-Net OS-E, offering a broad range of integrated session border control functionality in many dimensions:
- Session control protocols – SIP, H.323 and SIP-H.323 IWF
- Security – Net-SAFE: SBC DoS/DDoS protection, access control, topology hiding, VPN separation, privacy; virus and SPIT protection; service and application infrastructure DoS prevention; fraud prevention; monitoring and reporting
- Service and application reach – NAT traversal; IP address translation – private-public, OLIP/VPN bridging, IPv4-IPv6; number and URI manipulation; signaling message header manipulation; protocol interworking - signaling, transport and encryption protocols; response code translations; SDP and DTMF manipulation; transcoding
- SLA assurance – admission control – signaling and bandwidth constraints per user, network or session agent; signaling overload control; transport control – QoS marking/VLAN mapping, peer-peer media release; QoS and ASR routing and reporting; network element (L3 router, registrar, session agent) failure discovery, re-routing and/or load balancing
- Regulatory compliance – on-board and selective session replication for recording
- Cost management– accounting; routing – LCR, ENUM, by codec; service theft protection - bandwidth policing, QoS marking; session timers; service core normalization
- High availability – checkpointing of media and signaling state ensures no loss of active sessions, or state required for NAT traversal, session handling (transfer/hold, etc.) or accounting
- Management – embedded browser-based configuration and call tracing, Net-Net EMS, CLI, telnet, FTP, XML, RADIUS, SNMP, syslog
Net-SAFE™, Acme Packet’s security framework, features powerful denial-of-service/distributed denial-of service protection at the layer 3, layer 4, and SIP signaling level, and intrusion detection/prevention capabilities. Other security features support dynamic access control, topology hiding, privacy and confidentiality, service and application infrastructure DoS/DDoS protection, virus and SPIT protection, and fraud prevention.
Net-Net EMS, a GUI/browser-based client/server application supporting configuration, fault, performance and security management for multiple border elements in multiple networks, is one of many management tools available. Net-Net EMS can efficiently integrate into existing and next-generation enterprise management or service provider operational support systems through industry-standard SOAP/XML, SNMP v2c and syslog interfaces. Other management tools include command line interface (CLI), telnet, file transfer protocol (FTP) and RADIUS.
Net-Net 2600 capacity, performance and availability
The Net-Net 2600 satisfies enterprise and contact center SBC capacity and performance requirements without sacrificing functionality or high availability operation for non-stop service. It complements Acme Packet’s Net-Net 3000, 4000 and 9000 series platforms.
- Session capacity* – up to 4,000 simultaneous signaled sessions
- High-availability (HA) configuration – active/standby systems (1:1 redundancy) with check-pointing of signaling, media and configuration state for no loss of service
- Local route table entries – up to 1,000,000 routes
- TLS and SRTP encryption
- TLS connections – up to 4,000 sessions
- SRTP – up to 1,000 sessions
- Transcoding– up to 400 sessions; codecs: G.711, G.726, GSM FR, iLBC, G.723.1, G.729a, G.722.1 and AMR Narrowband
- Network interfaces – up to six (Net-Net 2610) or twelve (Net-Net 2620) active 10/100/1000 Mbps Ethernet interfaces (copper or fiber)
- System throughput – 5 Gbps
* Performance and capacity vary by signaling protocol, call flow, codec, configuration and feature usage.
The Net-Net 2600 is available in two models which only differ in chassis size, number of AC power supplies, storage redundancy and number of network interfaces (Table 1).
| |
|
Net-Net 2620
|
| Chassis size |
1U
|
2U
|
| AC power supplies |
1
|
2
|
| Storage |
750 GB
|
750 GB, redundant
|
| Network interfaces - 10/100/1000 Mbps |
6
|
6-12
|
Net-Net 2610/2620 specifications
| Chassis |
Net-Net 2610: 1U, slide or rack-mount
Net-Net 2620: 2U, slide or rack-mount
Front – LEDs for system ID, status and activity; hard disk drive bays; VGA input; USB 2.0 keyboard input; system reset power button; air intake
Rear – network interfaces, PS/2 keyboard interface, console ports
|
| Memory |
8 GB for active configuration and operation |
| Storage |
Net-Net 2610: 750 GB hard disk storage for operating system, configuration, accounting and on-board recording
Net-Net 2620: 1.5 TB redundant hard disk storage (750 GB effective capacity) for operating system, configuration and accounting storage; supports RAID level 1 for software and RAID level 10 for user data. |
Network interfaces unit (NIU) |
Net-Net 2610: six (6) 10/100/1000 Mbps interfaces
Net-Net 2620: up to twelve (12) 10/100/1000 Mbps interfaces – Six (6) 10/100/1000 Mbps interfaces plus up to six (6) additional interfaces in PCI network interface card (NIC) slots
Each NIC supports two (2) 10/100/1000 Mbps auto-sensing Ethernet interfaces with copper (RJ-45) or 1000Base-SX fiber (Net-Net 2620 only) connectors for signaling, media, data services and management
|
| Management interfaces |
10/100/1000 Mbps Ethernet console
One (1) RS-232 serial console interface with RJ-45 connector and DB-9 adapter
One (1) PS2 keyboard
Two (2) 15-pin VGA ports for external video display
|
| Power |
|
| Type |
Net-Net 2610: single 600W AC
Net-Net 2620: dual redundant 750W AC |
| Voltage |
100-127/200-240 VAC |
| Frequency |
43/67 Hz auto-ranging |
| Current |
Net-Net 2610: 6.5 / 3.2A
Net-Net 2620: 5.4 / 3.2A |
| Cables |
Net-Net 2610: standard IEC on one end, NEMA 5-15 (U.S. domestic) on other end
Net-Net 2620: separate receptacles and dual power cords with standard IEC on one end, NEMA 5-15 (U.S. domestic) on other end
Power cables also available for Europe, United Kingdom, Japan, China, Korea, Australia |
| Physical |
|
| Dimensions |
Net-Net 2610: 1.7 in H x 16.93 in W x 26.46 in D (4.3 cm H x 43.00 cm W x 67.2 cm D)
Net-Net 2620: 3.45 in H x 16.93 in W x 26.46 in D (8.75 cm H x 43.00 cm W x 67.2 cm D)
Note: Dimensions do not include mounting hardware |
| Weight |
Net-Net 2610: 30 lbs, 13.6 kg
Net-Net 2620: 50 lbs, 22.7 kg |
| Colors |
Midnight black with Glacier blue trim |
| Temperature |
Operating: 32ºF to 104ºF (0ºC to +40 ºC)
Storage: -4ºF to 158ºF (-20ºC to +70 ºC) |
| Relative humidity |
Operating and non-operating: 5% to 95% non-condensing |
| Fans and cooling |
Net-Net 2610: four (4) dual-rotor fans, one single-rotor fan to support cooling for processors, hard drive and add-in cards; two (2) fans for power supply cooling
Net-Net 2620: redundant set of four (4) fans to support cooling for processors, hard drives and add-in cards; two (2) fans for power supply cooling
All fans monitored and instrumented to provide RPM data for fan-failure prediction and deletion
|
| Power and heat dissipation |
Net-Net 2610: 1843 BTU maximum with 540W input
Net-Net 2620: 2048 BTU maximum with 660W input |
| Regulatory |
Product bears CE1 marking indicating compliance with the 99/5/EC directive, which includes the following EN and IEC standards for safety and EMI
|
| Safety |
USA: UL260950
Canada: CSA3 60950
EU: EN460950, CE – Low Voltage Directive 73/23/EEE
Germany: GS License
Russia/Belarus/Ukraine: GOST R 50377-92 License
Argentina: IRAM Certification
China: GB4943 – CNCA Certification
International: IEC560950, CB Certificate & Report
|
| EMI |
US: FCC6 Part 15 (CFR 47) Class A
Canada: ICES7-003 Class A
EU: EN55022
Japan: VCCI8 Class A
Australia / New Zealand: AS/NZS 3548
Taiwan: BSMI CNS13438
Russia: GOST R 29216-91
Korea: RRL MIC Notice No. 1997-41 (EMC) & 1997-42 (EMI)
International: CISPR 22
|
| Immunity |
|
| |
1CE = European Compliance
2UL = Underwriters Laboratory
3CSA = Canadian Standards Association
4EN = European Norm
5IEC = International Electrotechnical Commission
6FCC = Federal Communications Commission
7ICES = Interference-Causing Equipment Standard
8VCCI = Voluntary Control Council for Information Technology Equipment (Japan)
|
|
|